| <?xml version="1.0" encoding="utf-8"?> |
| <!-- |
| /* |
| ** Copyright 2016, The Android Open Source Project |
| ** |
| ** Licensed under the Apache License, Version 2.0 (the "License"); |
| ** you may not use this file except in compliance with the License. |
| ** You may obtain a copy of the License at |
| ** |
| ** http://www.apache.org/licenses/LICENSE-2.0 |
| ** |
| ** Unless required by applicable law or agreed to in writing, software |
| ** distributed under the License is distributed on an "AS IS" BASIS, |
| ** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| ** See the License for the specific language governing permissions and |
| ** limitations under the License. |
| */ |
| --> |
| |
| <resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> |
| |
| <!-- Our amoled doesn't animate well. --> |
| <bool name="config_animateScreenLights">false</bool> |
| |
| <bool name="config_ui_enableFadingMarquee">false</bool> |
| |
| <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be |
| autodetected from the Configuration. --> |
| <bool name="config_showNavigationBar">true</bool> |
| |
| <!-- Whether Multiuser UI should be shown --> |
| <bool name="config_enableMultiUserUI">true</bool> |
| |
| <!-- Maximum number of supported users --> |
| <integer name="config_multiuserMaximumUsers">4</integer> |
| |
| <!-- Boolean indicating if current platform supports HFP inband ringing --> |
| <bool name="config_bluetooth_hfp_inband_ringing_support">true</bool> |
| |
| <!-- Whether Hearing Aid profile is supported --> |
| <bool name="config_hearing_aid_profile_supported">true</bool> |
| |
| <!-- Boolean indicating whether the wifi chipset has dual frequency band support --> |
| <bool translatable="false" name="config_wifi_dual_band_support">true</bool> |
| |
| <!-- Enable 802.11ac for Wifi hotspot (SAP) --> |
| <bool translatable="false" name="config_wifi_softap_ieee80211ac_supported">true</bool> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| Wifi interfaces. If the device doesn't want to support tethering over Wifi this |
| should be empty. An example would be "softap.*" --> |
| <string-array translatable="false" name="config_tether_wifi_regexs"> |
| <item>"wlan0"</item> |
| <item>"softap.*"</item> |
| </string-array> |
| |
| <!-- List of regexpressions describing the interface (if any) that represent tetherable |
| USB interfaces. If the device doesn't want to support tething over USB this should |
| be empty. An example would be "usb.*" --> |
| <string-array translatable="false" name="config_tether_usb_regexs"> |
| <item>"usb\\d"</item> |
| <item>"rndis\\d"</item> |
| </string-array> |
| |
| <!-- When true use the linux /dev/input/event subsystem to detect the switch changes |
| on the headphone/microphone jack. When false use the older uevent framework. --> |
| <bool name="config_useDevInputEventForAudioJack">true</bool> |
| |
| <string translatable="false" name="config_radio_access_family">GSM|CDMA|EVDO|WCDMA|LTE</string> |
| |
| <!-- Enable doze mode |
| ComponentName of a dream to show whenever the system would otherwise have gone to sleep. --> |
| <string translatable="false" name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> |
| |
| <!-- Type of the ambient tap sensor. Empty if ambient tap is not supported. --> |
| <string name="config_dozeTapSensorType" translatable="false">com.google.sensor.single_touch</string> |
| |
| <!-- If this is true, the screen will come on when you unplug usb/power/whatever. --> |
| <bool name="config_unplugTurnsOnScreen">true</bool> |
| |
| <!-- If device supports pickup/lift gesture --> |
| <bool name="config_dozePulsePickup">true</bool> |
| |
| <!-- Screen brightness when dozing. --> |
| <integer name="config_screenBrightnessDoze">21</integer> |
| <item name="config_screenBrightnessDozeFloat" format="float" type="dimen">0.07874</item> |
| |
| <!-- Whether the always on display mode is available. --> |
| <bool name="config_dozeAlwaysOnDisplayAvailable">true</bool> |
| |
| <!-- Disable AOD by default --> |
| <bool name="config_dozeAlwaysOnEnabled">false</bool> |
| |
| <!-- Specifies whether to decouple the auto-suspend state of the device from the display on/off state. --> |
| <bool name="config_powerDecoupleAutoSuspendModeFromDisplay">true</bool> |
| |
| <!-- Specifies whether to decouple the interactive state of the device from the display on/off state. --> |
| <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> |
| |
| <!-- Radius of the software rounded corners. --> |
| <dimen name="rounded_corner_radius">157px</dimen> |
| |
| <!-- Adjustment for software rounded corners since corners aren't perfectly round. --> |
| <dimen name="rounded_corner_radius_adjustment">25px</dimen> |
| |
| <!-- Height of the status bar --> |
| <dimen name="status_bar_height_portrait">28dp</dimen> |
| |
| <!-- Height of area above QQS where battery/time go (equal to status bar height if > 48dp) --> |
| <dimen name="quick_qs_offset_height">171px</dimen> |
| <!-- Total height of QQS (quick_qs_offset_height + 128dp) --> |
| <dimen name="quick_qs_total_height">177dp</dimen> |
| |
| <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. --> |
| <integer name="config_shutdownBatteryTemperature">600</integer> |
| |
| <!-- Whether or not we should show the option to show battery percentage --> |
| <bool name="config_battery_percentage_setting_available">true</bool> |
| |
| <!-- Number of physical SIM slots on the device. This includes both eSIM |
| and pSIM slots, and is not necessarily the same as the number of phones/logical modems |
| supported by the device. For example, a multi-sim device can have 2 phones/logical modems, |
| but 3 physical slots, or a single SIM device can have 1 phones/logical modems, but 2 |
| physical slots (one eSIM and one pSIM) --> |
| <integer name="config_num_physical_slots">3</integer> |
| |
| <!-- Enable CBRS support --> |
| <bool translatable="false" name="config_cbrs_supported">true</bool> |
| |
| <!-- IWLAN--> |
| <string name="config_wlan_data_service_package">com.google.android.iwlan</string> |
| <string name="config_wlan_network_service_package">com.google.android.iwlan</string> |
| <bool name="config_wlan_data_service_conn_persistence_on_restart">false</bool> |
| <string name="config_qualified_networks_service_package">com.shannon.qualifiednetworksservice</string> |
| |
| <!-- Boolean indicating USSD over IMS is allowed. |
| If it is not supported due to modem limitations, USSD send over the CS pipe instead.--> |
| <bool name="config_allow_ussd_over_ims">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is available on device --> |
| <bool name="config_device_volte_available">true</bool> |
| |
| <!-- Flag specifying whether VoLTE is available on device --> |
| <bool name="config_device_vt_available">true</bool> |
| |
| <!-- Flag specifying whether WFC over IMS is availasble on device --> |
| <bool name="config_device_wfc_ims_available">true</bool> |
| |
| <!-- Whether the new Auto Selection Network UI should be shown --> |
| <bool name="config_enableNewAutoSelectNetworkUI">true</bool> |
| |
| <!-- Is the device capable of hot swapping an UICC Card --> |
| <bool name="config_hotswapCapable">true</bool> |
| |
| <!-- The default refresh rate. P21 manages this using the peak refresh rate setting, so set |
| this value to 0 so it has no effect. --> |
| <integer name="config_defaultRefreshRate">0</integer> |
| |
| <!-- The default peak refresh rate. --> |
| <integer name="config_defaultPeakRefreshRate">60</integer> |
| |
| <!-- Optional IPsec algorithms enabled by this device, defaulting to empty. OEMs can override |
| it by providing a list of algorithm names in an overlay config.xml file. |
| |
| As Android releases new versions, more algorithms are becoming mandatory. Mandatory |
| algorithms will be automatically enabled on the device. Optional algorithms need |
| to be explicitly declared in this resource to be enabled. |
| * SDK level 28 makes the following algorithms mandatory : "cbc(aes)", "hmac(md5)", |
| "hmac(sha1)", "hmac(sha256)", "hmac(sha384)", "hmac(sha512)", "rfc4106(gcm(aes))" |
| * SDK level 31 makes the following algorithms mandatory : "rfc3686(ctr(aes))", |
| "xcbc(aes)", "rfc7539esp(chacha20,poly1305)" |
| --> |
| <string-array name="config_optionalIpSecAlgorithms" translatable="false"> |
| <!-- Add algorithm here --> |
| <item>"xcbc(aes)"</item> |
| <item>"rfc3686(ctr(aes))"</item> |
| </string-array> |
| |
| <!-- List supported color modes. --> |
| <integer-array name="config_availableColorModes"> |
| <item>0</item> <!-- COLOR_MODE_NATURAL --> |
| <item>256</item> <!-- vendor color mode boosted --> |
| <item>3</item> <!-- COLOR_MODE_AUTOMATIC --> |
| </integer-array> |
| |
| <integer-array name="config_mappedColorModes"> |
| <item>0</item> <!-- COLOR_MODE_NATURAL --> |
| <item>256</item> <!-- COLOR_MODE_BOOSTED --> |
| <item>2</item> <!-- COLOR_MODE_SATURATED --> |
| <item>3</item> <!-- COLOR_MODE_AUTOMATIC --> |
| </integer-array> |
| |
| <!-- Color mode to use when accessibility transforms are enabled. This color mode must be |
| supported by the device, but not necessarily appear in config_availableColorModes. The |
| regularly selected color mode will be used if this value is negative. --> |
| <integer name="config_accessibilityColorMode">2</integer> |
| |
| <!-- Boolean indicating whether the HWC setColorTransform function can be performed efficiently |
| in hardware. --> |
| <bool name="config_setColorTransformAccelerated">true</bool> |
| |
| <!-- Default color temperature, in Kelvin, to tint the screen when night display is |
| activated. --> |
| <integer name="config_nightDisplayColorTemperatureDefault">3339</integer> |
| |
| <!-- Whether the device enable the standalone (SA) mode of 5G NR.--> |
| <bool name="config_telephony5gStandalone">true</bool> |
| <!-- Whether the device enable the non-standalone (NSA) mode of 5G NR.--> |
| <bool name="config_telephony5gNonStandalone">true</bool> |
| |
| <!-- An array of device capabilities defined by GSMA SGP.22 v2.2.2, and their corresponding major |
| version. --> |
| <string-array translatable="false" name="config_telephonyEuiccDeviceCapabilities"> |
| <item>"gsm,8"</item> |
| <item>"utran,9"</item> |
| <item>"eutran,15"</item> |
| <item>"nrepc,15"</item> |
| <item>"nr5gc,15"</item> |
| <item>"eutran5gc,15"</item> |
| </string-array> |
| |
| <!-- Auto-brightness sensor type string --> |
| <string name="config_displayLightSensorType">"com.google.sensor.auto_brightness"</string> |
| |
| <!-- Default list of files pinned by the Pinner Service --> |
| <string-array translatable="false" name="config_defaultPinnerServiceFiles"> |
| <item>"/apex/com.android.art/javalib/core-oj.jar"</item> |
| <item>"/apex/com.android.art/javalib/core-libart.jar"</item> |
| <item>"/apex/com.android.media/javalib/updatable-media.jar"</item> |
| <item>"/system/framework/framework.jar"</item> |
| <item>"/system/framework/services.jar"</item> |
| <item>"/system/bin/surfaceflinger"</item> |
| <item>"/system_ext/priv-app/SystemUIGoogle/SystemUIGoogle.apk"</item> |
| </string-array> |
| |
| <!-- Should the pinner service pin the Camera application? --> |
| <bool name="config_pinnerCameraApp">true</bool> |
| |
| <!-- Should the pinner service pin the Home application? --> |
| <bool name="config_pinnerHomeApp">true</bool> |
| |
| <!-- The default intensity level for haptic feedback. See |
| Settings.System.HAPTIC_FEEDBACK_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultHapticFeedbackIntensity">3</integer> |
| <!-- The default intensity level for notification vibrations. See |
| Settings.System.NOTIFICATION_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultNotificationVibrationIntensity">3</integer> |
| <!-- The default intensity level for notification vibrations. See |
| Settings.System.RING_VIBRATION_INTENSITY more details on the constant values and |
| meanings. --> |
| <integer name="config_defaultRingVibrationIntensity">3</integer> |
| |
| <!-- Enables or disables haptic effect when the text insertion/selection handle is moved |
| manually by the user. Off by default, since the expected haptic feedback may not be |
| available on some devices. --> |
| <bool name="config_enableHapticTextHandle">true</bool> |
| |
| <!-- Enable Zram writeback feature to allow unused pages in zram be written to flash. --> |
| <bool name="config_zramWriteback">true</bool> |
| </resources> |