| # Hey Emacs, this is a -*- makefile -*- |
| |
| # The purpose of this file is to define the build configuration variables used |
| # by the generic Makefile. See Makefile header for further information. |
| |
| # Copyright (c) 2009 Atmel Corporation. All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # |
| # 1. Redistributions of source code must retain the above copyright notice, this |
| # list of conditions and the following disclaimer. |
| # |
| # 2. Redistributions in binary form must reproduce the above copyright notice, |
| # this list of conditions and the following disclaimer in the documentation |
| # and/or other materials provided with the distribution. |
| # |
| # 3. The name of Atmel may not be used to endorse or promote products derived |
| # from this software without specific prior written permission. |
| # |
| # 4. This software may only be redistributed and used in connection with an Atmel |
| # AVR product. |
| # |
| # THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED |
| # WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| # MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE |
| # EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR |
| # ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| # (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| # LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| # ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| # SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE |
| # |
| |
| # Base paths |
| PRJ_PATH = ../../../../../../../../../.. |
| APPS_PATH = $(PRJ_PATH)/common/applications |
| BRDS_PATH = $(PRJ_PATH)/avr32/boards |
| COMP_PATH = $(PRJ_PATH)/avr32/components |
| DRVR_PATH = $(PRJ_PATH)/avr32/drivers |
| SERV_PATH = $(PRJ_PATH)/avr32/services |
| UTIL_PATH = $(PRJ_PATH)/avr32/utils |
| BRDS_COM_PATH = $(PRJ_PATH)/common/boards |
| COMP_COM_PATH = $(PRJ_PATH)/common/components |
| SERV_COM_PATH = $(PRJ_PATH)/common/services |
| UTIL_COM_PATH = $(PRJ_PATH)/common/utils |
| |
| THRD_PRJ_PATH = $(PRJ_PATH) |
| THRD_PATH = $(THRD_PRJ_PATH)/third_party |
| THRD_APPS_PATH = $(THRD_PATH)/applications |
| THRD_BRDS_PATH = $(THRD_PATH)/boards |
| THRD_COMP_PATH = $(THRD_PATH)/components |
| THRD_DRVR_PATH = $(THRD_PATH)/drivers |
| THRD_SERV_PATH = $(THRD_PATH)/services |
| THRD_UTIL_PATH = $(THRD_PATH)/utils |
| |
| # CPU architecture: {ap|ucr1|ucr2} |
| ARCH = ucr3 |
| |
| # Part: {none|ap7xxx|uc3xxxxx} |
| PART = uc3b0128 |
| |
| |
| # Flash memories: [{cfi|internal}@address,size]... |
| FLASH = internal@0x80000000,128Kb |
| |
| # Clock source to use when programming: [{xtal|extclk|int}] |
| PROG_CLOCK = int |
| |
| # Device/Platform/Board include path |
| PLATFORM_INC_PATH = \ |
| $(BRDS_PATH)/ |
| |
| # Target name: {*.a|*.elf} |
| TARGET = $(PART)-usb_device_mouse.elf |
| |
| # Definitions: [-D name[=definition]...] [-U name...] |
| # Things that might be added to DEFS: |
| # BOARD Board used: see $(BRDS_PATH)/board.h |
| # EXT_BOARD Extension board used (if any): see $(BRDS_PATH)/board.h |
| DEFS = -D BOARD=EVK1101 -D __AVR32_UC128D3__ -U __AVR32_UC3B0128__ |
| |
| # Include path |
| INC_PATH = \ |
| $(UTIL_PATH)/ \ |
| $(UTIL_PATH)/preprocessor/ \ |
| $(UTIL_COM_PATH)/ \ |
| $(BRDS_COM_PATH)/ \ |
| $(DRVR_PATH)/gpio/ \ |
| $(DRVR_PATH)/intc/ \ |
| $(DRVR_PATH)/eic/ \ |
| $(DRVR_PATH)/pm/ \ |
| $(DRVR_PATH)/scif/ \ |
| $(DRVR_PATH)/flashcdw/ \ |
| $(DRVR_PATH)/usbc/ \ |
| $(COMP_PATH)/joystick/skrhabe010/ \ |
| $(SERV_COM_PATH)/basic/clock/ \ |
| $(SERV_COM_PATH)/basic/sleepmgr/ \ |
| $(SERV_COM_PATH)/usb/ \ |
| $(SERV_COM_PATH)/usb/udc/ \ |
| $(SERV_COM_PATH)/usb/class/hid/ \ |
| $(SERV_COM_PATH)/usb/class/hid/device/ \ |
| $(SERV_COM_PATH)/usb/class/hid/device/mouse/ \ |
| ../../ \ |
| ../ \ |
| |
| # $(DRVR_PATH)/pm/pm.c \ |
| # C source files |
| CSRCS = \ |
| $(DRVR_PATH)/intc/intc.c \ |
| $(DRVR_PATH)/flashcdw/flashcdw.c \ |
| $(DRVR_PATH)/gpio/gpio.c \ |
| $(DRVR_PATH)/eic/eic.c \ |
| $(DRVR_PATH)/usbc/usbc_device.c \ |
| $(BRDS_PATH)/evk1101/init.c \ |
| $(BRDS_PATH)/evk1101/led_uc3d.c \ |
| $(SERV_COM_PATH)/basic/clock/uc3d/sysclk.c \ |
| $(SERV_COM_PATH)/basic/clock/uc3d/pll.c \ |
| $(SERV_COM_PATH)/basic/clock/uc3d/osc.c \ |
| $(SERV_COM_PATH)/basic/sleepmgr/uc3/sleepmgr.c \ |
| $(SERV_COM_PATH)/usb/udc/udc.c \ |
| $(SERV_COM_PATH)/usb/class/hid/device/udi_hid.c \ |
| $(SERV_COM_PATH)/usb/class/hid/device/mouse/udi_hid_mouse.c \ |
| $(SERV_COM_PATH)/usb/class/hid/device/mouse/udi_hid_mouse_desc.c \ |
| ../../main.c \ |
| ../ui.c \ |
| |
| # Assembler source files |
| ASSRCS = \ |
| $(UTIL_PATH)/startup/trampoline_uc3.S \ |
| $(DRVR_PATH)/intc/exception.S |
| |
| # Library path |
| LIB_PATH = |
| |
| # Libraries to link with the project |
| LIBS = |
| |
| # Linker script file if any |
| LINKER_SCRIPT = $(UTIL_PATH)/linker_scripts/atuc_d/128/gcc/link_uc128dx.lds |
| |
| # Options to request or suppress warnings: [-fsyntax-only] [-pedantic[-errors]] [-w] [-Wwarning...] |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| WARNINGS = -Wall |
| |
| # Options for debugging: [-g]... |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| DEBUG = -g |
| |
| # Options that control optimization: [-O[0|1|2|3|s]]... |
| # For further details, refer to the chapter "GCC Command Options" of the GCC manual. |
| OPTIMIZATION = -Os -fsection-anchors -ffunction-sections |
| |
| # Extra flags to use when preprocessing |
| CPP_EXTRA_FLAGS = |
| |
| # Extra flags to use when compiling |
| C_EXTRA_FLAGS = |
| |
| # Extra flags to use when assembling |
| AS_EXTRA_FLAGS = |
| |
| # Extra flags to use when linking |
| LD_EXTRA_FLAGS = -Wl,--direct-data,--gc-sections,-e,_trampoline |
| |
| # Documentation path |
| DOC_PATH = \ |
| ../doc/ |
| |
| # Documentation configuration file |
| DOC_CFG = \ |
| ../doxyfile.doxygen |