MakefileBasedBuild/Atmel/sam3x/sam3x-ek/libraries/memories/nandflash/NandSpareScheme.c

/* ----------------------------------------------------------------------------
 *         ATMEL Microcontroller Software Support
 * ----------------------------------------------------------------------------
 * Copyright (c) 2010, Atmel Corporation
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * - Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the disclaimer below.
 *
 * Atmel's name may not be used to endorse or promote products derived from
 * this software without specific prior written permission.
 *
 * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
 * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * ----------------------------------------------------------------------------
 */

/**
 * \file
 *
 * NandSpareScheme layer is used to do Nandflash device's spare area operations.
 * It is called by upper layer drivers, such as SkipBlockNandFlash layer.
 *
 * -# NandSpareScheme_WriteBadBlockMarker is used to mark a badblock marker inside a spare
 *     area.
 * -# NandSpareScheme_ReadBadBlockMarker is used to readout the marker.
 * -# NandSpareScheme_ReadEcc is used to read out ecc from spare area using the provided
 *      spare scheme.
 * -# NandSpareScheme_WriteEcc is used to write ecc to spare area using the provided
 *      spare scheme.
 * -# NandSpareScheme_ReadExtra is used to read extra bytes from spare area using the provided
 *      spare scheme.
 * -# NandSpareScheme_WriteExtra is used to write extra bytes to spare area using the provided
 *      spare scheme.
 */

/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/

#include "memories.h"
#include <assert.h>

/*----------------------------------------------------------------------------
 *        Exported variables
 *----------------------------------------------------------------------------*/

/** Spare area placement scheme for 256 byte pages.*/
const struct NandSpareScheme nandSpareScheme256 = {

    /* Bad block marker is at position #5*/
    5,
    /* 3 ecc bytes*/
    3,
    /* Ecc bytes positions*/
    {0, 1, 2},
    /* 4 extra bytes*/
    4,
    /* Extra bytes positions*/
    {3, 4, 6, 7}
};

/** Spare area placement scheme for 512 byte pages.*/
const struct NandSpareScheme nandSpareScheme512 = {

    /* Bad block marker is at position #5*/
    5,
    /* 6 ecc bytes*/
    6,
    /* Ecc bytes positions*/
    {0, 1, 2, 3, 6, 7},
    /* 8 extra bytes*/
    8,
    /* Extra bytes positions*/
    {8, 9, 10, 11, 12, 13, 14, 15}
};

/** Spare area placement scheme for 2048 byte pages.*/
const struct NandSpareScheme nandSpareScheme2048 = {

    /* Bad block marker is at position #0*/
    0,
    /* 24 ecc bytes*/
    24,
    /* Ecc bytes positions*/
    {40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
     58, 59, 60, 61, 62, 63},
    /* 38 extra bytes*/
    38,
    /* Extra bytes positions*/
    { 2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
     21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39}
};

/** Spare area placement scheme for 4096 byte pages.*/
const struct NandSpareScheme nandSpareScheme4096 = {

    /* Bad block marker is at position #0*/
    0,
    /* 48 ecc bytes*/
    48,
    /* Ecc bytes positions*/
    { 80,  81,  82,  83,  84,  85,  86,  87,  88,  89,  90,  91,  92,  93,  94,
      95,  96,  97,  98,  99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109,
     110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124,
     125, 126, 127},
    /* 78 extra bytes*/
    78,
    /* Extra bytes positions*/
    { 2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20,
     21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,
     40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58,
     59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
     78, 79}
};


/*----------------------------------------------------------------------------
 *        Exported fumction
 *----------------------------------------------------------------------------*/

/**
 * \brief Reads the bad block marker inside a spare area buffer using the provided
 *
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param marker Pointer to the variable to store the bad block marker.
 */
void NandSpareScheme_ReadBadBlockMarker(
    const struct NandSpareScheme *scheme,
    const uint8_t *spare,
    uint8_t *marker)
{
    *marker = spare[scheme->badBlockMarkerPosition];
}

/**
 * \brief Modifies the bad block marker inside a spare area, using the given scheme.
 *
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param marker Bad block marker to write.
 */
void NandSpareScheme_WriteBadBlockMarker(
    const struct NandSpareScheme *scheme,
    uint8_t *spare,
    uint8_t marker)
{
    spare[scheme->badBlockMarkerPosition] = marker;
}

/**
 * \brief Reads ECC information from a spare area using the provided scheme.
 *
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param ecc  ECC buffer.
 */
void NandSpareScheme_ReadEcc(
    const struct NandSpareScheme *scheme,
    const uint8_t *spare,
    uint8_t *ecc)
{
    uint32_t i;
    for (i=0; i < scheme->numEccBytes; i++) {

        ecc[i] = spare[scheme->eccBytesPositions[i]];
    }
}

/**
 * \brief Writes ECC information in a spare area, using a particular scheme.
 *
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param ecc  ECC buffer.
 */
void NandSpareScheme_WriteEcc(
    const struct NandSpareScheme *scheme,
    uint8_t *spare,
    const uint8_t *ecc)
{
    uint32_t i;
    for (i=0; i < scheme->numEccBytes; i++) {

        spare[scheme->eccBytesPositions[i]] = ecc[i];
    }
}
/**
 * \brief Reads extra bytes of information from a spare area, using the provided
 * scheme.
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param extra  Extra bytes buffer.
 * \param size  Number of extra bytes to read.
 * \param offset  Index where to read the first extra byte.
 */
void NandSpareScheme_ReadExtra(
    const struct NandSpareScheme *scheme,
    const uint8_t *spare,
    void *extra,
    uint8_t size,
    uint8_t offset)
{
    assert( (size + offset) < scheme->numExtraBytes ) ; /* "NandSpareScheme_ReadExtra: Too many bytes\n\r" */

    uint32_t i;
    for (i=0; i < size; i++) {

        ((uint8_t *) extra)[i] = spare[scheme->extraBytesPositions[i+offset]];
    }
}
/**
 * \brief Write extra bytes of information from a spare area, using the provided
 * scheme.
 * \param scheme Pointer to a NandSpareScheme instance.
 * \param spare  Spare area buffer.
 * \param extra  Extra bytes buffer to write.
 * \param size  Number of extra bytes to write.
 * \param offset  Index where to read the first extra byte.
 */
void NandSpareScheme_WriteExtra(
    const struct NandSpareScheme *scheme,
    uint8_t *spare,
    const void *extra,
    uint8_t size,
    uint8_t offset)
{
    assert( (size + offset) < scheme->numExtraBytes ) ; /* "NandSpareScheme_WriteExtra: Too many bytes\n\r" */

    uint32_t i;
    for (i=0; i < size; i++) {

        spare[scheme->extraBytesPositions[i+offset]] = ((uint8_t *) extra)[i];
    }
}