| #ifndef _BOARD_LCD_ | |
| #define _BOARD_LCD_ | |
| /** | |
| * \file | |
| * LCD | |
| * | |
| * - \ref BOARD_LCD_PINS | |
| * - \ref BOARD_BACKLIGHT_PIN | |
| * - \ref BOARD_LCD_BASE | |
| * - \ref BOARD_LCD_RS | |
| * - \ref BOARD_LCD_WIDTH | |
| * - \ref BOARD_LCD_HEIGHT | |
| * | |
| */ | |
| /** LCD Base Address */ | |
| #define BOARD_LCD_BASE 0x62000000 | |
| /** LCD pins definition. */ | |
| #define BOARD_LCD_PINS PIN_EBI_DATA_BUS, PIN_EBI_NRD, PIN_EBI_NWE, PIN_EBI_NCS2, PIN_EBI_LCD_RS | |
| /** Board chip select */ | |
| #define BOARD_LCD_NCS 2 | |
| /** Board LCD SMC setup timings */ | |
| #define BOARD_TIMING_NS(ns) \ | |
| (((uint32_t) ((ns*(BOARD_MCK/1000000))/1000)) + 1) | |
| #define BOARD_LCD_SETUP \ | |
| SMC_SETUP_NWE_SETUP(BOARD_TIMING_NS(10)) | \ | |
| SMC_SETUP_NCS_WR_SETUP(BOARD_TIMING_NS(10)) | \ | |
| SMC_SETUP_NRD_SETUP(BOARD_TIMING_NS(90)) | \ | |
| SMC_SETUP_NCS_RD_SETUP(BOARD_TIMING_NS(90)) | |
| /** Board LCD SMC pulse timings */ | |
| #define BOARD_LCD_PULSE \ | |
| SMC_PULSE_NWE_PULSE(BOARD_TIMING_NS(35)) | \ | |
| SMC_PULSE_NCS_WR_PULSE(BOARD_TIMING_NS(35)) | \ | |
| SMC_PULSE_NRD_PULSE(BOARD_TIMING_NS(355)) | \ | |
| SMC_PULSE_NCS_RD_PULSE(BOARD_TIMING_NS(355)) | |
| /** Board LCD SMC cycle timings */ | |
| #define BOARD_LCD_CYCLE \ | |
| SMC_CYCLE_NWE_CYCLE(BOARD_TIMING_NS(100)) | \ | |
| SMC_CYCLE_NRD_CYCLE(BOARD_TIMING_NS(460)) | |
| /** Board LCD SMC mode */ | |
| #define BOARD_LCD_MODE \ | |
| SMC_MODE_WRITE_MODE | \ | |
| SMC_MODE_READ_MODE | \ | |
| SMC_MODE_DBW | |
| /** Display width in pixels. */ | |
| #define BOARD_LCD_WIDTH 320 | |
| /** Display height in pixels. */ | |
| #define BOARD_LCD_HEIGHT 240 | |
| /** Backlight pin definition. */ | |
| #define BOARD_BACKLIGHT_PIN {PIO_PB27, PIOB, ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT} | |
| #endif /* _BOARD_LCD_ */ |